Contactnomanakhter.com

Noman Akhter

Technology · Business · Tutorials
Tutorials

How to Set Up Home Wi-Fi That Actually Covers the Whole House

Pakistani houses are built of concrete and brick, often with a staircase in the middle and the internet connection coming into whichever corner the fibre installer found easiest. Then we wonder why Wi-Fi is perfect in the lounge and useless in the bedroom upstairs. I've fixed this in my own house, my parents' house and more friends' houses than I can count, and the fix is usually cheaper than people fear. Sometimes it's free.

Here's the order I go in. Don't skip to buying a mesh system; half the time step one or two solves it.

Step 1: Move the router (free)

The single biggest improvement, and nobody does it because the fibre terminates where it terminates. But the router doesn't have to sit on the floor behind the TV in the corner room. Ask the ISP for a longer fibre patch cable or run an Ethernet cable from the ONT (the fibre box) to a better spot. Rules:

  • As central as possible, horizontally and vertically. In a two-storey house, a landing or a central room on the ground floor near the stairs is ideal.
  • High up: on a shelf or wall-mounted, not on the floor. Signal spreads down and out more than up.
  • Away from the fridge, microwave, metal cupboards, water tanks and aquariums. Water and metal kill Wi-Fi.
  • Out in the open, not inside a cabinet. That decorative box your router lives in is costing you half your signal.

Step 2: Fix the settings (free)

Log in to the router (usually 192.168.1.1 or 192.168.0.1, password on the sticker). Then:

  • Separate the bands. Most routers broadcast 2.4 GHz and 5 GHz as one network name. Give them different names (e.g. Home and Home-5G). 5 GHz is fast but weak through walls; 2.4 GHz is slower but reaches further. Connect phones in far rooms to the 2.4 GHz network and devices near the router to 5 GHz.
  • Change the channel. In dense neighbourhoods, everyone's router is on the same channel. On 2.4 GHz, try channel 1, 6 or 11 and see which is best. A free app like WiFi Analyzer (Android) shows which channels your neighbours use.
  • Update the firmware. ISP routers often ship with old software. Check for an update in the admin panel.
  • Change the default password while you're there, both the Wi-Fi password and the admin password. Your neighbour's kids streaming on your connection is a real reason it's slow.

Step 3: Decide whether you have a coverage problem or a speed problem

Stand in the bad room and run a speed test on your phone (fast.com or the Speedtest app). Then run one next to the router.

  • If the router speed is also bad, the problem is your ISP package or the router itself, not coverage. Call the ISP.
  • If the router speed is good and the far room is bad, you have a coverage problem. Continue.

Step 4: Extend the network (Rs. 3,000–30,000)

Three options, from worst to best:

Wi-Fi repeater/extender (Rs. 3,000–6,000). Plugs into a socket halfway, catches the signal and rebroadcasts it. Cheap and easy, but it halves the speed and creates a second network name that your phone won't switch to smoothly. Fine for one dead room where you just need WhatsApp and YouTube. I don't recommend them for anything more.

Second router with an Ethernet cable (Rs. 4,000–10,000 plus cable). The best value if you can run a cable. Buy any decent router, put it in access-point mode, connect it to the main router with Ethernet, and give it the same network name and password. Full speed, no halving. A Rs. 1,500 cable through a conduit or along a skirting board is worth the effort. Many houses already have unused telephone conduit you can pull a cable through.

Mesh system (Rs. 15,000–40,000 for two or three units). TP-Link Deco, Tenda Nova, Xiaomi and others are widely available in Pakistan now. Units talk to each other wirelessly, one network name throughout the house, phones hand over seamlessly as you walk. This is the "just make it work" option for families and for houses where running cables isn't possible. For a typical 240–500 square yard house, two or three units cover everything including the roof. The Deco M4 and M5 class is the sweet spot; you don't need the expensive Wi-Fi 6E models unless you have gigabit fibre.

Step 5: The devices that should never be on Wi-Fi

Anything that sits still and matters should be on a cable: the smart TV, the desktop PC, the gaming console, a work laptop at a fixed desk, the CCTV recorder. Every device you take off Wi-Fi frees up airtime for the phones. If your TV is near the router and buffering, a Rs. 300 Ethernet cable fixes it permanently.

Load-shedding and UPS

A router and ONT together draw maybe 15–20 watts. A small dedicated "mini UPS" for routers (Rs. 3,000–6,000) keeps the internet alive for a few hours when the power goes, without draining your main UPS. If you work from home, this is the best Rs. 5,000 you'll spend.

The quick checklist

  1. Move the router central and high.
  2. Split the bands, change the channel, update firmware, change passwords.
  3. Measure: is it speed or coverage?
  4. Cable a second access point if you can; mesh if you can't; extender only as a last resort.
  5. Put stationary devices on Ethernet.
  6. Add a router UPS.

My own house went from "no signal in two rooms" to full coverage with one Rs. 6,000 router in access-point mode and a cable I ran myself on a Sunday. Before you spend on a mesh system, try steps one and two tonight; they take an hour. And if you're in an area where the whole problem is the connection itself, see my piece on whether Starlink is worth waiting for. Tell me your house layout in the comments and I'll suggest where the router should go.

Noman Akhter

Written by Noman Akhter (Startups Coach)

Online business expert and IT consultant since 2005. Founder of NAFsols and Startups Pakistan. More at nomanakhter.com.

Comments

Post a Comment